The TS-GAC has the same properties as a normal GAC filter but has added phosphate crystals to reduce rust stains and scale deposits protecting pipes, appliances such as kettles and washing machines, and commercial equipment.

This filter again shares the same properties as a GAC filter but the added calcite helps improve tastse and pH neutralise the water.

This filter is used to de-ionise water. It uses a nuclear grade resin making it suitable for critical applications such as pharmaceutical. This filter would typically be used either where there are very low flow rates or as a polisher after an RO unit (reverse osmosis).

At a TDS of 50 ppm (or mg/l) you would expect this resin cartridge to last for approximately 500 litres. A lower tds would result in the cartridge lasting longer or a higher tds a shorter period.

This filter again shares the same properties as a GAC filter. The added KDF (Kinetic Degradation Fluxion) process media are high-purity copper-zinc granules that reduce contaminants in water using an oxidation/reduction (redox) reaction. They are used in pretreatment, primary treatment and wastewater treatment applications in order to extend system life and to reduce heavy metal contamination, chlorine and hydrogen sulfide.

This filter has the same properties as a normal GAC filter but is impregnated with silver which has natural anti-bacterial properties.

Many municiple water suppliers are now dosing our water supplies with highly controversal Fluoride (linked to elevated cancer risk and lower IQ). Flouride is notoriously difficult to remove from water but this filter will substantially reduce flouride content.