Aeration Systems

Air contact systems (aeration systems) are primarily used for mixing air with the water, this aids the oxidisation of certain components in the water. One of the most common uses is to oxidise soluble Iron and Manganese into insoluble hydroxides.
The air is drawn in using a Mazzei injector, this creates a venturi effect that draws air into the inlet pipe to the contact vessel. There is also a spring loaded bypass fitted, this will open automatically when a large volume of water is required to backwash a system following the aeration.
The feed pressure and flow needs to be sufficient to create the venturi effect, the system will also need to be placed before any accumulator on a pressurised system; all other filtration should follow an accumulator.
It is important to avoid back pressure on the Mazzei also any filtration following the aeration should not be higher; flow controllers should only be used on the final filter.
The system you select should be the same size as the iron filter it precedes.

Clack V3006 Bypass

Clack V3006 Bypass

Price: 22.80 (27.36 Including VAT at 20%)

Clack WS1 Vertical Adaptor Assembly (Max 14

Clack WS1 Vertical Adaptor Assembly (Max 14" Vessel) (V3191-01)

Price: 13.10 (15.72 Including VAT at 20%)

Clack V3193-02 Servicing Wrench

Clack V3193-02 Servicing Wrench

Price: 8.90 (10.68 Including VAT at 20%)

Clack WS1 Air Draw Kit

Clack WS1 Air Draw Kit

Price: 27.85 (33.42 Including VAT at 20%)

Ozone Generator

Ozone Generator

Price: 289.95 (347.94 Including VAT at 20%)